Place of Origin: | China |
Brand Name: | Saint Best |
Certification: | CE/ISO etc |
Model Number: | SBT-HMA98 |
Minimum Order Quantity: | 1 |
---|---|
Price: | Negotiable |
Packaging Details: | Wooden Case or Customized |
Delivery Time: | 5-15days |
Payment Terms: | T/T,Western Union,Moneygram,Paypal |
Supply Ability: | 86Sets/Month |
Hot Melt Applicator,Hot Melt Dispenser,Hot Melt Extruder Machine,Hot Melt Machine,Hot Melt Coating Machine,Hot Melt Sealing Robot
HOT MELT MACHINE,Hot Melt Dispenser,Hot Melt Applicator,
Item specifics
Certification: CEBrand Name: SAINT BESTMachine Type: Glass Coating MachinePlace of Origin: China (Mainland),ShandongModel Number: SBT-HMDB
Specifications
Machine Name
HMD-B HOT MELT MACHINE
General Description
HMD-B HOT MELT MACHINE is designed for the hot melt of insulating glass with aluminum spacer. It is of the second generation of equipment with the same model. It is small and light, easy to operate and repair and has stable control over temperature. Operation can be carried out after preheating of half an hour.
Technical Index
Power Supply: Frequency: 50Hz
Voltage: three-phase five-wire system 380V
Total power: 5.5KW
Extruding Speed: above 1000g/min
Dimension (length × width × height): 550×500×920 (mm)
Total Weight: 100kg
Installation and Trial Run
a) No special conditions are required except that the operation site is kept clean.
b) Make sure the power be connected correctly in accordance with the requirements.
c) Put the designated rubber block in the rubber box, set the temperature (reference degree being 150°C-170°C) and preheat it for about 30 minutes.
d) When the set temperatures of the rubber and rubber pipe have been satisfied, triggering the rubber gun can extrude the hot melt.
Special Explanations
a) The extruding speed could be regulated, which is advised not to be too fast in the beginning. In view of different temperatures of different points in the hot melt when it is first extruded, a small amount of extrusion is recommended before formal extrusion is carried out.
b) The operation should not be conducted unless the rubber pump reaches its set temperature. (Inside the machine, protective setting is designed, so the motor will not work if set temperature is not satisfied.)
c) The fluid rubber level should be kept above the heater by adding the rubber blocks timely according to its consumption.
d) The inclusion of foreign matter is strictly prohibited to protect the machine.
e) After operation, leave enough rubber in the rubber box for next heating and then turn off the power.
f) Hang the rubber gun on the slinger when it is not used.
Note: Do not touch the gun mouth and the cover of the rubber box to avoid injury.
HOT MELT MACHINE, Hot Melt Dispenser, Hot Melt Applicator, Hot Melt Extruder,Hot Melt Extruder Machine, Hot Melt Sealant,Hot Melt Adhesive Dispenser,Glass Coating Machine
Payment
TT/LC
Delivery
15Days
Origin
China
Minimum Order
1Set
Packaging
Customized
Inspection
CE/ISO9001
Samples
Charge
Remarks
HOT MELT MACHINE, Hot Melt Dispenser, Hot Melt Applicator, Hot Melt Extruder,Hot Melt Extruder Machine, Hot Melt Sealant,Hot Melt Adhesive Dispenser,Glass Coating Machine,HOT MELT MACHINE, Hot Melt Dispenser, Hot Melt Applicator, Hot Melt Extruder,Hot Melt Extruder Machine, Hot Melt Sealant,Hot Melt Adhesive Dispenser,Glass Coating Machine,Hot Melt Thermo Extruder,Portable Hot Melt Machine,Hot melt extruder,Thermal Extruder,Mini Thermal Extruder,Hot melt sealant extruder,Hot melt extruder,Hot melt Dispenser,Hot melt machine,hot melt coating machine,hot melt extruder machine,butyl extruder,butyl extruder machine,sealant sealing robot
Hot melt sealant extruder
It is designed for hot melt of insulating glass, easy operation and simultaneous extrusion from two outlets, both manual and automatic operation available.
It is designed for the hot melt of insulating glass with aluminum spacer. It is of the second generation of equipment l. It is small and light, easy to operate and repair and has stable control over temperature. Operation can be carried out after preheating of half an hour.
Technical Parameter:
Power Supply: 380V/50Hz
Heating Power: 5.5Kw
Speed Of gun output: 0.4Kg/min
Overall Dimensions: 550mmX500mmX920mm
Technical Characteristics
35kg Hopper Capacity
1kg/min Output
3m High-Quality Hose
4 Zones Temperature Control
Low Temperature Protect
Wear Gear Pump with "Easy to Repair" Sealing System
Platinum Thermocouples
Stainless Steel Heating Rods
"Cool to Touch" Moulded Gun Handle
Leakage Protection
Infinite Speed Variation
Low Energy Consumption
Plastic Spraying Machine Body
2.2m× 1.6m/2.2m Application Table Optional
Technical Data:
Voltage: 220V/1Phase
Frequency: 50/60Hz
Total Power: 4kW
Motor: 0.37kW
L/W/H: 730mm× 470mm× 1080mm
Hollow Glass Production Line,Insulating Glass Machine,Double gazed glass machine,Hollow glass machine,glass machine,glass washing machine,roller press machine,hot melt machine,I.G unit machine,Insulating Glass Production Line Rubber Spacer insulating glass production line,rubber spacer strip insulating glass machine,rubber spacer glass machine,sealant spacer insulating glass machine,truseal spacer I.G machine,superspacer I.G machine,Insulating glass sealing spacer machine,Hollow Glass Machine,Double Glazed Glass Machine,Double Glazed Insulated Glass Machine,Double Glazing Glass Process Machine,Window Glass Machine,Double Glazing Glass Machine,Double Glazed Glass Machine,Hot melt Dispenser,Hot Melt Sealant Extruder,Hot Melt Machine,Hot melt sealant extruder ,Hot melt extruder,Hot melt Dispenser,Sealant extruder,extruder machine,Hot melt sealant machine ,butyl extruder machine,hot melt coating machine,glass machine Insulating glass processing machinery,such as truseal spacer insulating glass production line,superpacer insulating glass production line, truseal spacer insulating glass machine,superpacer insulating glass machine, heated roller press machine,cold roller pres machine,insualting glass washer,insulating glass washing machine,hot melt sealant extruder,hot melt machine,hot melt extruder,hot melt coating machine,butyl sealnt extruder machine,butyl extruder,manual glass press machine,butyl sealant tape coating machine,air floated application table,sealing application table,spacer bending machine,Low-e chenking pen,optics glass thickness gauge,manual glass thickness gauge,glass detector pen,pneumatic gule gun,pneumatic press machine,molecular sieve,butyl tape,rubber strip,album making machine,UV coating machine,PVC window&door processing machinery, Aluminium window&door processing machinery Super Spacer Insulating Glass machine, truseal spacer insulating glass machine, flexible spacer insulating glass machine, horizontal insulating glass machine, Vertical insulating glass machine, insulating glass machine, aluminum spacer insulating glass machine, Insulating Glass Production Line, horizontal Super Spacer line, Horizontal IG equipment, horizontal Super Spacer production line, automated Super Spacer line, automated Truseal Spacer line, automated Swiggle Spacer line, automated Aluminum Spacer line, automated Sealant Spacer line, automated Rubber Spacer line, Super Spacer Insulating Glass equipment, Truseal Spacer Insulating Glass equipment,Insulating glass processing machinery,such as truseal spacer insulating glass production line,superpacer insulating glass production line, truseal spacer insulating glass machine,superpacer insulating glass machine, heated roller press machine,cold roller pres machine,insualting glass washer,insulating glass washing machine,hot melt sealant extruder,hot melt machine,hot melt extruder,hot melt coating machine,butyl sealnt extruder machine,butyl extruder,manual glass press machine,butyl sealant tape coating machine,air floated application table,sealing application table,spacer bending machine,Low-e chenking pen,optics glass thickness gauge,manual glass thickness gauge,glass detector pen,pneumatic gule gun,pneumatic press machine,molecular sieve,butyl tape,rubber strip,album making machine,UV coating machine,PVC window&door processing machinery, Aluminium window&door processing machinery