This horizontal Glass Seaming Line is made up of Automatic Four Side Edger and Glass Washing Machine.Automatic Glass Loading is optional.The edging speed can reach 30m/m and glass washing can reach 15m/min.It can be used for Insulating Glass line,tempered furnace etc.
Full automatic horizontal flat glass grinding production line,Glass Automatic Four Sides Seaming Line,glass automatic horizontal four edge machine,Automatic Horizontal Four Sides Glass Seaming Line,Horizontal Automatic Four Sides Glass Seaming Line,Automatic Horizontal Four Sides Glass Arrising Line,Horizontal Automatic Four Sides Glass Arrising Line,Automatic Horizontal Four Sides Glass Edging Line,Horizontal Automatic Four Sides Glass Edging Line.
Glass Automatic Four Sides Seaming Machine
- Pioneered positioning mode: Non touch glass after positioning probe switch. Longer life, more convenient operation and maintenance;
- Patent structure, processing glass thickness 4~12mm;
- All imported servo electronic, to make the equipment more stable and reliable;
- Transmission using a toothed chain transmission, more stable, more static;
- Opening & Closing using rack drive, speed up to 30 meters per minute, more accurate, more durable;
Ⅰ. Main Technical Data：
|Min Processing Size：
|Max Processing Size：
|Width of Arris：
||Arris: 1～30m/min, Hemline: 1~25m/min
High Speed Horizontal Low-E Glass Washing Machine
Compose by in-feed, washing, drying(3 pairs of air knives), and out-feed sections.
2. Technique Parameter：
Max. Glass Width：2500x4000mm
Min. Glass Size：380×380mm（1PC glass only）
Glass Thickness：3-20mm（digital display）
- Within 6mm thickness, Vmax=12~15m/min. There is not any drop and stain on the glass with
standard drying effect.
- Thickness from 8~20mm, Vmax =5~10m/min. There is not any drop and stain on the glass with
standard drying effect.
- Adjustment of main conveying：Frequency Control
- Platform Height：890±50 mm
- Total Power：About 38KW
- Water source：Recycling tap water.
- Water system: There are 3 stainless steal water tank, 3water pumps. The pumps have quick
- The first water tank has 1pc water pump(0.55kw). The stainless steel spraying pipe spay the glass with tap water.
- The second, third and fourth water tank has 1pc water pump(0.55kw) respectively. The stainless steel spraying pipe spay the glass with tap water.
- The water tank can use the water circularly.
- Power: 380V(+ 5%~10%), Mid cable+Ground cable, 50±2Hz
- Noise: 1M away from machine, ≤85 DB（A）
- Weight: 3800KG
- Overall Size: 6000×3300×900mm
- Industry Standard: ZBJ/HB021-2007
- Main conveying transmitted by bevel gear which is table and durable.
- The body frame is welded by 80x80x3mm square bar. Surface treatment: polishing & painting(Green oil).
- Before washing, the glass will be cooled by high pressure spraying.
- There are 3 pairs of brushes wash the glass when step in washing section.
- The washing&drying section can be lift up 400mm,which is easy the clean the rollers&maintain the machine.
- There are 3pairs of air knives, the air blower box is installed on the top of the machine.
- There is a filter in air blower. After drying, there is not any drop and stain on the surface of glass.The noise of the air blower is low.
- All parts will touch water are using 201 stainless steel.
- No water leaking.